Sanas Recommended System Settings

Access System Sound Settings

• Open system sound settings.

• Output - select the physical headset connected to the system as the output device.

  

• Input - select Sanas Microphone as the Input Microphone

  

• Access More Sound Settings

  

• Set the Playback settings as shown below

  • Set the physical headset connected to the system as the default device.

  • Disable any system inbuilt speakers.

  • Leave Speaker Sanas Virtual Audio in Ready status as shown in the image left.

• Set the recording settings as shown below

  • Set Sanas Microphone as the Default device and default communication device as well.

  • The physical headset commented to the system should be in ready status as shown in the image left.

  • Rest all available microphones can be in a Disconnected or disabled state to ensure they do not get selected by Windows automatically in any case.

• Set the communications setting as shown below

  • Select “Do nothing” on the communications window.

Additional Sound settings for physical headset (Optional and may not be available for all headphones)

Match the audio format of Sanas and Headphone

• Double-click on the headset microphone.

• Click on the Advanced Tab.

• Click on the dropdown menu under the default format.

• Choose 1 channel, 16-bit, 16000 Hz (Tape Recorder Quality).

• Uncheck both the options under “Exclusive Mode”.

• Click apply and ok.

• Refer to the image below

• Check and confirm that the headphone input volume is set to max