Sanas with Web-Based Dialer - Generic Configuration

Web-Based Dialer Settings

To use Sanas in conjunction with a web-based dialer, you would typically need to configure your browser settings to use the Sanas Virtual Microphone as the preferred microphone input device.

The exact steps for configuring the microphone settings in your web browser can vary depending on the browser you are using. Generally, you would go to your browser's settings or preferences and look for the microphone settings. Here's a general guideline using Google Chrome as an example:

1. Set the system configuration as per Sanas Recommended Settings.

2. Open your web browser (e.g., Google Chrome, Mozilla Firefox, Microsoft Edge).

3. Access the browser's settings or preferences. You can typically find this in the menu (three horizontal lines or dots in the top-right corner).

   

4. Look for the "Settings" or "Preferences" option as shown in the above example from Google Chrome.

5. Go to Privacy and Security, then go to Site Settings.

6. Search for "Microphone" or "Audio" settings within the browser settings.

   

7. In the microphone settings, you should see a list of available microphones. Select "Sanas Virtual Microphone" as your preferred microphone.

   

8. Save or apply the settings.

9. Open the web-based dialer and it should now use the Sanas Virtual Microphone for audio input.

10. If the dialer page was already open, refresh the page after completing steps 1 to 6.